MF877-00 Page 23
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at
10. Use a Philips #1 bit to remove the three screws marked in the image below from the bottom of the chassis to
remove the PSU divider.
11. Use a Philips #1 bit to remove the two screws from the top side of the divider assembly to remove the divider.
12. Use a Phillips #2 bit to remove the 32 screws from the right side and 20 screws from left side of the base
chassis to remove the drive bay wall.
