HP Array Configuration Utility 40
A list of all possible options for that task appears on the right side of the screen, replacing the task list.
4.
Select the settings or configuration options for the device.
5.
Use the Next and Back buttons to navigate multiple screens of options.
6.
Click
Save
or
OK
.
Rapid Parity Initialization
When you create a logical drive, you must initialize the parity using Rapid Parity Initialization.
RAID levels that use parity (RAID 5, RAID 6 (ADG), RAID 50, and RAID 60) require that the parity blocks be
initialized to valid values. Valid parity data is required to enable enhanced data protection through
background surface scan analysis and higher performance write operations. Two initialization methods are
available:
•
Default
– Initializes parity blocks in the background while the logical drive is available for access by the
operating system. A lower RAID level results in faster parity initialization.
•
Rapid
– Overwrites both the data and parity blocks in the foreground. The logical drive remains
invisible and unavailable to the operating system until the parity initialization process completes. All
parity groups are initialized in parallel, but initialization is faster for single parity groups (RAID 5 and
RAID 6). RAID level does not affect system performance during rapid initialization.
Rapid Parity Initialization is available only for supported controllers and in arrays composed of supported
physical drives.
To select the method for parity initialization:
1.
Open ACU.
For more information, see "Using the ACU GUI (on page
27
)."
