manualshive.com logo in svg

HP Compaq SP700, Reference Manual, Page: 74 / 174

Share
Download
HP Compaq SP700 Reference Manual Download Page 74

5-3

Compaq Professional Workstation SP700 Reference Guide

Writer: kmosby   Project: Compaq Professional Workstation SP700 Reference Guide   Comments: 320280-002

File Name: F-CH05.DOC   Last Saved On: 12/11/98 10:48 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Using Audio CDs

To play an audio CD, follow these steps:

1. Select 

Programs from the Start button.

2. Then 

select 

Multimedia from the Accessories menu.

3. Click 

CD Player, found in the Multimedia group box, to control audio

compact disc play.

Information on using CD Player can be found in the online help for that utility.

CD-ROM Drive or DVD-ROM Drive
Precautions

To ensure that the CD-ROM drive or DVD-ROM drive operates properly,
observe the following precautions:

■ 

Do not move the drive during operation. This may cause it to
malfunction during reading.

■ 

Avoid exposing the drive to sudden changes in temperature, because
condensation may form inside the unit. If the temperature suddenly
changes while the drive is on, wait at least one hour before you turn off
the power. If you operate the unit immediately, it may malfunction while
reading.

■ 

Avoid placing the drive in a location that is subject to high humidity,
extreme temperatures, mechanical vibration, or direct sunlight.

■ 

Clean the panel and controls with a soft, dry cloth or a soft cloth lightly
moistened with a mild detergent solution. Never spray cleaning fluids
directly on the unit.

■ 

Avoid using any type of solvent, such as alcohol or benzene, which may
damage the finish.

■ 

If any object or liquid falls into the slot, immediately unplug the
workstation and have it checked by an authorized Compaq service
provider.

Summary of Contents for Compaq SP700















































































































































































Reviews:

No comments