HP Compaq Presario CQ57 Maintenance And Service Manual Download Page 85

Page: 85 / 117

●

Display assembly (see

Display assembly on page 64

)

●

System board (see

System board on page 71

)

Remove the fan/heat sink assembly:

Disconnect the fan cable from the system board.

Turn the system board upside down, with the front toward you.

Loosen the captive screws

(1)

that secure the fan/heat sink assembly to the system board.

NOTE:

The number of screws used to secure the fan/heat sink assembly to the system board

varies by computer model.

NOTE:

Due to the adhesive quality of the thermal material located between the heat sink and

system board components, it may be necessary to move the heat sink from side to side to
detach it.

Remove the fan and heat sink

(2)

NOTE:

The following illustration shows the fan/heat sink assembly removal process on a computer

model equipped with an AMD processor.

Component replacement procedures

Summary of Contents for Compaq Presario CQ57






















































































































Search results

Summary of Contents for Compaq Presario CQ57

Reviews:

Related manuals for Compaq Presario CQ57

Brands by name

Popular brands

HP Compaq Presario CQ57, Maintenance And Service Manual

Search results

Summary of Contents for Compaq Presario CQ57

Reviews:

Related manuals for Compaq Presario CQ57

Brands by name

Popular brands