HP Compaq NX9600 Maintenance And Service Manual Download Page 47

Page: 47 / 198

Troubleshooting

Maintenance and Service Guide

2–23

Flowchart 2.17—Nonfunctioning Device

Done

Any physical

device detected?

Unplug the nonfunctioning device from

the notebook and inspect cables and plugs for

bent or broken pins or other damage.

Reseat

device.

Clear

CMOS.

Done

Fix or

replace

broken item.

Nonfunctioning

device.

Reattach device.

Close notebook,

plug in power,

and reboot.

Device

boots

properly?

Go to

“Flowchart

2.9—No

Operating System

(OS) Loading.”

Device

boots

properly?

Replace hard drive.

Replace diskette

drive.

Replace NIC.

If integrated NIC,

replace system

board.

Summary of Contents for Compaq NX9600







































































































































































































Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands

HP Compaq NX9600, Maintenance And Service Manual

Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands