HP Compaq NX9600 Maintenance And Service Manual Download Page 141

Page: 141 / 198

Removal and Replacement Procedures

Maintenance and Service Guide

5–61

2. Disconnect the fan cable from the system board

3. According to the 1, 2, 3, 4 sequence stamped into the heat

sink module, loosen the four PM2.0×12.0 spring-loaded
shoulder screws

that secure the heat sink module to the

system board.

4. Lift the heat sink module and remove it

✎

Due to the adhesive quality of the thermal paste located
between the heat sink module and processor, it may be
necessary to move the module from side to side to detach the
module from the processor.

Removing the Heat Sink Module

Reverse the above procedure to install the heat sink module.

Summary of Contents for Compaq NX9600







































































































































































































Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands

HP Compaq NX9600, Maintenance And Service Manual

Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands