manualshive.com logo in svg

HP Compaq nx6115, Maintenance And Service Manual

Share
Download
HP Compaq nx6115 Maintenance And Service Manual Download Page 45

Troubleshooting

Maintenance and Service Guide

2–19

Flowchart 2.11—No OS Loading, Hard Drive, 
Part 2

Load OS using 

Operating System 

disc (if applicable).

Continued from

“Flowchart 

2.10—No OS 

Loading, 

Hard Drive, Part 1.”

Reseat

hard drive.

Done

CD or

diskette in

drive?

1. Replace 

hard drive.

2. Replace system 

board.

Go to

“Flowchart 

2.13—No OS 

Loading, 

Diskette Drive.”

Format hard drive

and bring to

a bootable

C:\ prompt.

Create partition, 
and then format 

hard drive to 

bootable

C:\ prompt.

Boot

from diskette

drive?

Remove

diskette and

reboot.

Y

N

Boot

from

hard drive?

Y

N

Y

N

Hard drive 

accessible?

Y

N

Hard drive

accessible?

Done

Run FDISK.

Y

N

Hard drive

partitioned?

Hard drive

formatted?

Y

N

Y

N

Notebook

booted?

Done

Y

N

Go to

“Flowchart 

2.12—No OS 

Loading, 

Hard Drive, Part 3.”

Go to

“Flowchart 

2.12—No OS 

Loading, 

Hard Drive, Part 3.”

Summary of Contents for Compaq nx6115


































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands