HP Compaq nx6115 Maintenance And Service Manual Download Page 41

Page: 41 / 225

Troubleshooting

Maintenance and Service Guide

2–15

Flowchart 2.7—No Video, Part 2

Continued from

“Flowchart

2.6—No Video,

Part 1.”

Done

Adjust external

monitor display.

Video OK?

Adjust

display

brightness.

Video OK?

Done

Check that notebook is properly

seated in docking device, for

bent pins on cable, and for

monitor connection.

Go to “A” in

“Flowchart

2.6—No Video,

Part 1.”

Check brightness

of external

monitor.

Try another

external
monitor.

Internal

and external

video OK?

Go to

“Flowchart

2.8—Nonfunctioning

Docking Device (if

applicable).”

Remove

notebook from

docking device,

if connected.

Summary of Contents for Compaq nx6115


































































































































































































































Search results

Summary of Contents for Compaq nx6115

Reviews:

Related manuals for Compaq nx6115

Brands by name

Popular brands

HP Compaq nx6115, Maintenance And Service Manual

Search results

Summary of Contents for Compaq nx6115

Reviews:

Related manuals for Compaq nx6115

Brands by name

Popular brands