HP Compaq nx6115 Maintenance And Service Manual Download

Page: 106 / 225

6–6

Maintenance and Service Guide

Removal and Replacement Procedures

6.4 Hard Drive

1. Prepare the notebook for disassembly (refer to

Section 6.3

2. Loosen the 2 Phillips PM2.5×6.0 screws

that secure the

hard drive cover to the notebook.

3. Lift the right side of the hard drive cover and swing it to

the left

4. Remove the hard drive cover.

✎

The hard drive cover is included in the Miscellaneous Plastics
Kit, spare part number 393593-001.

Removing the Hard Drive Cover

Hard Drive Spare Part Number Information

5400-rpm

80-GB

60-GB
40-GB

393548-001

393546-001
393544-001

4200-rpm

80-GB

60-GB
40-GB

30-GB

393547-001

393545-001
393543-001

393542-001

Summary of Contents for Compaq nx6115


































































































































































































































Search results

Summary of Contents for Compaq nx6115

Reviews:

Related manuals for Compaq nx6115

Brands by name

Popular brands

HP Compaq nx6115, Maintenance And Service Manual

Search results

Summary of Contents for Compaq nx6115

Reviews:

Related manuals for Compaq nx6115

Brands by name

Popular brands