HP Compaq nc8000 Hardware Manual Download

Page: 96 / 117

8–2

Hardware Guide

Hardware Upgrades

CAUTION:

If you install software or enablers provided by a PC Card

manufacturer, you may not be able to use other PC Cards. If you are
instructed by the documentation included with your PC Card to install
device drivers:

■

Install only the device drivers for your operating system.

■

Do not install other software, such as card services, socket services,
or enablers, that may also be supplied by the PC Card
manufacturer.

Inserting a PC Card

CAUTION:

To prevent damage to the connectors:

■

Use minimal pressure when inserting a PC Card into a
PC Card slot.

■

Do not move or transport the notebook while a PC Card
is inserted.

To insert a PC Card:

1. Hold the PC Card label-side up with the connector facing the

notebook.

2. Gently push the card into the slot until the card is seated. The

operating system will issue a sound to indicate that a device
has been detected.

333955-001.book Page 2 Monday, July 14, 2003 11:27 AM

Summary of Contents for Compaq nc8000






















































































































Search results

Summary of Contents for Compaq nc8000

Reviews:

Related manuals for Compaq nc8000

Brands by name

Popular brands

HP Compaq nc8000, Hardware Manual

Search results

Summary of Contents for Compaq nc8000

Reviews:

Related manuals for Compaq nc8000

Brands by name

Popular brands