manualshive.com logo in svg

HP Compaq nc8000, Hardware Manual

Share
Download
HP Compaq nc8000 Hardware Manual Download Page 52

3–14

Hardware Guide

Battery Packs

Calibrating a Battery Pack

This section describes when and how to calibrate a battery pack.

When to Calibrate

Even if a battery pack is heavily used, it should not be necessary 
to calibrate it more than once a month. It is not necessary to 
calibrate a new battery pack before first use. Calibrate the battery 
pack under the following conditions:

■

When battery charge displays seem inaccurate.

■

When you observe a significant change in battery run time.

■

When the battery pack has not been used for one month 
or more.

How to Calibrate

To calibrate a battery pack, you must fully charge, fully 
discharge, then fully recharge the battery pack.

Charging the Battery Pack

Battery packs can charge whether or not the notebook is in use, 
but charge faster when the notebook is off.

To charge the battery pack:

1. Insert the battery pack into the notebook.

2. Connect the notebook to an AC outlet or an optional 

Automobile Power Adapter/Charger. The battery light 
on the notebook turns on.

3. Leave the notebook connected to external power until the 

battery pack is fully charged. The battery light on the 
notebook turns off.

333955-001.book  Page 14  Monday, July 14, 2003  11:27 AM

Summary of Contents for Compaq nc8000






















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands