6–52
Maintenance and Service Guide
Removal and Replacement Procedures
2. Remove the two Phillips PM2.5×3.0 screws
1
that secure the
Mini Card WWAN module to the system board. (The edge of
the module opposite the socket rises away from
the computer.)
3. Remove the Mini Card WWAN module
2
by pulling the
module away from the socket at an angle.
✎
Mini Card WWAN modules are designed with notches
3
to
prevent incorrect installation.
Removing the Mini Card WWAN Module
Reverse the above procedure to install the Mini Card
WWAN module.
