manualshive.com logo in svg

HP Compaq NC4010, Software Manual, Page: 56 / 91

Share
Download
HP Compaq NC4010 Software Manual Download Page 56

Optical Drive Software

Software Guide

4–13

Erasing Recorded Media with Creator Classic

To erase recorded media formatted with Creator Classic:

1. Insert the CD into the optical drive.

2. Open the Creator Classic window:

❏

In Windows 2000,

 select Start > Programs > Roxio Easy 

CD and DVD Creator > Creator Classic.

❏

In Windows XP, 

select Start > All Programs > Roxio 

Easy CD and DVD Creator > Creator Classic.

3. In the Source window, select the optical drive containing the 

disc you wish to erase.

4. On the Creator Classic menu bar, select Disc > Erase Disc.

Selecting Easy CD & DVD Creator Settings

To use Drag-to-Disc, Creator Classic, or Disc Copier, the default 
settings shown in the following table must be selected. These 
settings are compatible; for example, the settings for 
Drag-to-Disc do not conflict with the settings for Disc Copier.

Application

Required Settings 

Drag-to-Disc

Enable Auto Insert Notification*

Creator Classic

Disable Disc-at-Once**
and
Enable Track-at-Once**

Disc Copier

Disable Disc-at-Once

*Auto Insert Notification settings are selected through the operating 
system.
**Disk-at-Once and Track-at-Once are recording methods that appear 
in the Record Setup window after you begin burning a CD.

310029-002.book  Page 13  Friday, October 24, 2003  1:48 PM

Summary of Contents for Compaq NC4010




























































































Reviews:

No comments