HP Compaq NC4000 Maintenance And Service Manual Download

Page: 100 / 168

5–26

Maintenance and Service Guide

Removal and Replacement Procedures

✎

Each time the heat sink is removed, any thermal grease residue
should be carefully cleaned from the heat sink

and processor

surfaces

, and new thermal grease should be applied to both

surfaces.

Removing the Thermal Grease From the Heat Sink and Processor

Reverse the above procedure to install the heat sink and fan.

5.11 Processor

1. Prepare the notebook for disassembly (Section 5.3).

2. Remove the LED switch cover (Section 5.7).

3. Remove the keyboard (Section 5.8).

Processor

Spare Part Number Information

Intel Pentium-M 1.6 GHz
Intel Pentium-M 1.5 GHz
Intel Pentium-M 1.4 GHz
Intel Pentium-M 1.3 GHz

319777-001
319776-001
319775-001
319774-001

Summary of Contents for Compaq NC4000









































































































































































Search results

Summary of Contents for Compaq NC4000

Reviews:

Related manuals for Compaq NC4000

Brands by name

Popular brands

HP Compaq NC4000, Maintenance And Service Manual

Search results

Summary of Contents for Compaq NC4000

Reviews:

Related manuals for Compaq NC4000

Brands by name

Popular brands