HP Compaq NC4000 Maintenance And Service Manual Download Page 121

Page: 121 / 168

Removal and Replacement Procedures

Maintenance and Service Guide

5–47

3. Disconnect the modem board cable

from the modem

board.

4. Remove the two PM2.0×3.0 screws

that secure the modem

board to the system board.

5. Lift the rear edge of the modem board

to disconnect it from

the system board.

6. Remove the modem board.

7. If the modem board cable must be replaced, remove the

tape

that secures the cable to the system board and

disconnect the cable

from the system board.

✎

The modem cable is included with the modem board and is also
included in the Miscellaneous Plastics Kit, spare part number
325528-001.

Removing the Modem Board

Reverse the above procedure to install the modem board.

Summary of Contents for Compaq NC4000









































































































































































Search results

Summary of Contents for Compaq NC4000

Reviews:

Related manuals for Compaq NC4000

Brands by name

Popular brands

HP Compaq NC4000, Maintenance And Service Manual

Search results

Summary of Contents for Compaq NC4000

Reviews:

Related manuals for Compaq NC4000

Brands by name

Popular brands