B-2
www.hp.com
Hardware Reference Guide
Battery Replacement
Ä
CAUTION:
Static electricity can damage the electronic components of
the computer or optional equipment. Before beginning these procedures,
ensure that you are discharged of static electricity by briefly touching a
grounded metal object.
1. Turn off the computer properly through the operating system,
then turn off any external devices. Disconnect the power cord
from the power outlet and disconnect any external devices. Then
remove the computer access panel.
✎
It may be necessary to remove an expansion card to gain access to
the battery.
2. Locate the battery and battery holder on the system board.
3. Depending on the type of battery holder on the system board,
complete the following instructions to replace the battery.
Type 1
a.
Lift the battery out of its holder.
Removing a Coin Cell Battery (Type 1)
b.
Slide the replacement battery into position, positive side up.
The battery holder automatically secures the battery in the
proper position.
