manualshive.com logo in svg

HP Compaq CQ10-420, Maintenance And Service Manual, Page: 41 / 115

Share
Download
HP Compaq CQ10-420 Maintenance And Service Manual Download Page 41

4

Removal and replacement
procedures

Preliminary replacement requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:

●

Flat-bladed screwdriver

●

Magnetic screwdriver

●

Phillips P0 and P1 screwdrivers

Service considerations

The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.

NOTE:

As you remove each subassembly from the device, place the subassembly (and all

accompanying screws) away from the work area to prevent damage.

Plastic parts

CAUTION:

Using excessive force during disassembly and reassembly can damage plastic parts. Use

care when handling the plastic parts. Apply pressure only at the points designated in the maintenance
instructions.

Preliminary replacement requirements

31

Summary of Contents for Compaq CQ10-420




















































































































Reviews:

No comments