manualshive.com logo in svg

HP Compaq Businessdc7600, Service & Reference Manual

Share
Download
HP Compaq Businessdc7600 Service & Reference Manual Download Page 20

2–6

390742-001

Service Reference Guide, dc7600

Setup Utilities and Diagnostics Features

Storage 

(continued)

Device 
Configuration 

(continued)

Default Values IDE/SATA

If selected, this option allows you to specify the default values for the 
Multisector Transfers, Transfer Mode, and Translation Mode for ATA 
devices.

Multisector Transfers

 

(ATA disks only)

Specifies how many sectors are transferred per multi-sector 
PIO operation. Options (subject to device capabilities) are 
Disabled, 8, and 16.

Transfer Mode

 

(IDE devices only)

Specifies the active data transfer mode. Options (subject to 
device capabilities) are PIO 0, Max PIO, Enhanced DMA, 
Ultra DMA 0, and Max UDMA.

Translation Mode

 

(ATA disks only)

Lets you select the translation mode to be used for the device. 
This enables the BIOS to access disks partitioned and 
formatted on other systems and may be necessary for users of 
older versions of UNIX (e.g., SCO UNIX version 3.2). 
Options are Automatic, Bit-Shift, LBA Assisted, User, and 
None

Ä

CAUTION:

 Ordinarily, the translation mode selected 

automatically by the BIOS should not be changed. If the 

selected translation mode is not compatible with the 

translation mode that was active when the disk was 

partitioned and formatted, the data on the disk will be 

inaccessible.

Translation Parameters

 

(ATA disks only)

✎

This feature appears only when User translation mode is 

selected.

Allows you to specify the parameters (logical cylinders, 
heads, and sectors per track) used by the BIOS to translate 
disk I/O requests (from the operating system or an 
application) into terms the hard drive can accept. Logical 
cylinders may not exceed 1024. The number of heads may 
not exceed 256. The number of sectors per track may not 
exceed 63. These fields are only visible and changeable 
when the drive translation mode is set to User.

Storage Options

Removable Media Boot

 

Enables/disables ability to boot the system from removable media.

Legacy Diskette Write

Enables/disables ability to write data to legacy diskettes.

✎

After saving changes to Removable Media Write, the computer 
will restart. Turn the computer off, then on, manually.

Heading

Option

Description

✎

Support for specific Computer Setup options may vary depending on the hardware configuration.

Summary of Contents for Compaq Businessdc7600













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands