HP Compaq 800c Hardware Manual Download

Page: 99 / 127

7–2

Hardware Guide

Hardware Upgrades

Configuring a PC Card

CAUTION:

If you install all of the software or any of the enablers

provided by a PC Card manufacturer, you may not be able to use other
PC Cards. If you are instructed by the documentation included with
your PC Card to install device drivers:

■

Install only the device drivers for your operating system.

■

Do not install other software, such as card services, socket
services, or enablers, that may also be supplied by the PC Card
manufacturer.

Inserting a PC Card

CAUTION:

To prevent damage to the PC Card connectors:

■

Use minimal pressure when inserting a PC Card into a
PC Card slot.

■

Do not move or transport the notebook while a PC Card is
inserted.

1. Hold the PC Card label-side up with the connector facing

the notebook.

2. Gently push the card into the slot until the card is seated.

Inserting a PC Card

265656-002.book Page 2 Thursday, February 20, 2003 2:32 PM

Summary of Contents for Compaq 800c
































































































































Search results

Summary of Contents for Compaq 800c

Reviews:

Related manuals for Compaq 800c

Brands by name

Popular brands

HP Compaq 800c, Hardware Manual

Search results

Summary of Contents for Compaq 800c

Reviews:

Related manuals for Compaq 800c

Brands by name

Popular brands