2–8
Hardware Guide
Pointing Devices and Keyboard
The
Fn+F2
hotkeys are enabled by default, but can be disabled in
Computer Setup. The device in the MultiPort can be set to remain
on or off while the
Fn+F2
hotkeys are disabled.
Fn+F2
hotkeys preferences are set in Computer Setup. Computer
Setup is a non-Windows utility. For more information about
using Computer Setup, refer on this CD to the
Software Guide,
“Setup and Diagnostic Utilities” section.
1. To open Computer Setup, turn on or restart the notebook,
then press
F10
while the F10 = ROM Based Setup message is
displayed in the lower left of the screen.
❏
To change the language, press
F2.
❏
To view navigation information, press
F1.
2. Use the arrow keys to select the Security menu, then press
enter.
3. Use the arrow keys to select Device Security, then press
enter.
4. Select MultiPort Fn+F2. The status of the device in the
MultiPort is displayed at the bottom of the screen.
5. To change the status of the device in the MultiPort, press the
Fn+F2
hotkeys. (The device in the MultiPort will remain in
whichever status is selected at the time that the
Fn+F2
hotkeys
are disabled.)
6. To disable the
Fn+F2
hotkeys, set the status field beside
MultiPort Fn+F2 to Disable. (To reenable the
Fn+F2
hotkeys,
set this status field to Enable.)
7. To confirm your settings, press
F10.
8. To exit Computer Setup, use the arrow keys to select an exit
option from the File menu, then follow the instructions on
the screen.
Your preference is set as you exit Computer Setup and is in effect
when the notebook restarts.
265656-002.book Page 8 Thursday, February 20, 2003 2:32 PM
