HP Compaq 6005 Pro MT Hardware Reference Manual Download Page 8

Page: 8 / 62

Front Panel Components

Drive configuration may vary by model.

Table 1-1

Front Panel Components

5.25-inch Optical Drives

Optical Drive Eject Buttons

Optical Drive Activity Lights

3.5-inch Media Card Reader (optional)

Hard Drive Activity Light

Dual-State Power Button

Microphone/Headphone Connector

Power On Light

USB (Universal Serial Bus) 2.0 Ports

Headphone Connector

NOTE:

When a device is plugged into the Microphone/Headphone Connector, a dialog box will pop up asking if you

want to use the connector for a microphone line Line-In device or a headphone. You can reconfigure the connector at
any time by double-clicking the Realtek HD Audio Manager icon in the Windows taskbar.

NOTE:

The Power On Light is normally green when the power is on. If it is flashing red, there is a problem with the

computer and it is displaying a diagnostic code. Refer to the

Troubleshooting Guide

to interpret the code.

Some models have bezel blanks covering one or both of the 5.25-inch drive bays.

Some models have a bezel blank covering the 3.5-inch drive bay.

Chapter 1 Product Features

ENWW

Summary of Contents for Compaq 6005 Pro MT































































Search results

Summary of Contents for Compaq 6005 Pro MT

Reviews:

Related manuals for Compaq 6005 Pro MT

Brands by name

Popular brands

HP Compaq 6005 Pro MT, Hardware Reference Manual

Search results

Summary of Contents for Compaq 6005 Pro MT

Reviews:

Related manuals for Compaq 6005 Pro MT

Brands by name

Popular brands