manualshive.com logo in svg

HP Chromebook x360 14a-cb0 Series, Maintenance And Service Manual, Page: 52 / 71

Share
Download
HP Chromebook x360 14a-cb0 Series Maintenance And Service Manual Download Page 52

17.

If you need to remove the display hinges:

a.

Remove the display bezel.

b.

Remove the display panel.

c.

Remove the display hinge plug (1) from the right hinge.

d.

Remove the two Phillips M2.0 × 2.9 screws (2) that secure the hinge brackets to the display back 

cover.

e.

Remove the six Phillips M2.5 × 3.0 broad head screws (3) that secure the hinges to the display back 

cover.

f.

Release the hinges (4) by sliding them to the inside of the display back cover, and then remove the 

hinges.

The hinges are available using spare part number M59266-001.

g.

To remove the hinge covers, remove the Phillips M2.0 × 2.9 screw (1) that secures the hinge cover to 

the hinge.

h.

Remove the hinge cover (2).

The hinge covers are available using spare part number M59267-001.

46

Chapter 5  Removal and replacement procedures for authorized service provider parts

Summary of Contents for Chromebook x360 14a-cb0 Series








































































Reviews:

No comments