manualshive.com logo in svg

HP Chromebook x360 14a-cb0 Series, Maintenance And Service Manual, Page: 12 / 71

Share
Download
HP Chromebook x360 14a-cb0 Series Maintenance And Service Manual Download Page 12

Table 2-3

Display components and their descriptions

Component

Description

(1)

WLAN antennas*

Send and receive wireless signals to communicate with wireless local 

area networks (WLANs).

(2)

Internal microphones (2) 

Record sound.

(3)

Camera 

Allows you to video chat, record video, and record still images.

NOTE:

Camera functions vary depending on the camera hardware and 

software installed on your product.

(4)

Camera light 

On: The camera is in use.

Off: The camera is turned off by the software.

*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the 

antennas free from obstructions.

For wireless regulatory notices, see the section of the 

Regulatory, Safety, and Environmental Notices

 that applies to your country or region.

Touchpad

The touchpad is described here.

6

Chapter 2  Components

Summary of Contents for Chromebook x360 14a-cb0 Series








































































Reviews:

No comments