HP C7745NB - SureStore DLT Tape Autoloader 1/9, Service Manual

Page: 21 / 153

Chapter 1 Installing the Autoloader into a Rack 21
Ch
ap
ter
1
Installing the Autoloader into a Rack
The rackmount tray holds two autoloaders side-by-side and requires 6 EIA
(26.67cm or 10.5 inches) of clearance in the rack. For standalone
autoloaders, see Preparing the Host for Installation on page 28.
Tools and Parts
Ensure that you have the following:
■
Phillips #2 screwdriver
■
Torx screwdriver with T-15, T-20, and T-25 bits
Table 4
Rack Kit Parts
Callout
Number
Description and Quantity
1 Filler panel (Qty 1)
2 Trim brackets (Qty 2)
3 55-mm Spacer brackets (Qty 2,
left and right)
4 Hold-down bars (Qty 2)
5 Tray (Qty 1)
6 Mounting rails (Qty 2, left and
right)
7 Clip nut template (Qty 1)
8 10-32 Machine screws (Qty 8)
9 10-32 Clip nuts (Qty 12)
10 10-32 Flat-head screws (Qty 2)