Chapter 1: Introduction 3
Step 3 Grasp the HCO box and set it upright. Then, remove the
cardboard on top of the HCO.
The HCO’s legs and casters should rest on the bottom of the box.
Step 4 Grasp the top and bottom of the HCO and roll it slowly out of
the box. Make sure the HCO doesn’t fall back as you roll it
from the box. See Figure 3.
Figure 3 Removing the HCO
CAUTION
When you unpack and install the HCO, do not use the paper input guide
on the back of the HCO to move or lift the HCO. You might damage
the guide.
Step 5 Remove the plastic bag and all the packing tape from the
HCO and set the packing material aside.
Don’t forget to open the HCO door and remove the tape on the paper
guides inside the HCO. Otherwise, paper jams will occur.
It’s a good idea to save the packing material in case you need to ship
the HCO in the future.
HCO
