Chapter 2: Using the HCO 29
To separate the HCO from the printer:
Step 1 Pull the HCO latch lever towards you and move the HCO
away from the printer. See Figure 31.
Figure 31 Separating the HCO from the printer
Move the HCO as far as the stopper that connects the HCO to the
printer allows (about 1 inch).
Step 2 Check for any paper jammed between the HCO and the
printer.
If no other paper jam messages appear on the printer’s control panel,
you’re ready to reattach the HCO and resume printing.
If the control panel still shows the same jam, search the area again. If
the control panel shows another type of jam, search the area
indicated.
Latch lever
