Table 9 Connecting via a management station
Management
station
First switch
Second switch
Third switch
Ethernet
192.168.1.09
192.168.1.10
204.1.1.11
204.1.1.12
FCIP
192.168.65.09
192.168.65.10
192.168.65.11
192.168.65.12
Gateway
192.168.1.10
any, not self
192.168.1.10
192.168.1.10
Maintaining the 4Gb SAN Switch
The 4Gb SAN Switch does not require any regular physical maintenance.
However, it is critical that environmental conditions, described in
Environmental
requirements
are met to help prevent switch failure due to heat stress or improper air
fl
ow.
Installing dust covers in empty ports
The dust covers included in the 4GB SAN Switch shipping carton, (see
Figure 1
)
must
be inserted in ports where SFPs are not installed. Installing dust covers ensures proper
air
fl
ow and helps reduce dust contamination of the switch.
Replacing an SFP transceiver
In some cases you might need to reinstall an SFP transceiver.
To remove an SFP transceiver:
1.
Press and hold the cable release.
2.
Remove the cable from the transceiver.
3.
Pull the bail (wire handle) to release the transceiver.
4.
Grasp the bail, and gently but
fi
rmly pull the transceiver out of the port.
5.
Repeat this procedure for the remaining ports as required.
Brocade 4Gb SAN Switch for HP c-Class BladeSystem
43
