HP BL30p - ProLiant - 1 GB RAM Maintenance And Service Manual Download Page 62

Page: 62 / 63

Index

handle

memory See DIMMs

removing 2-22
replacing 2-22

hard drive

NIC riser board

spare part number 1-5

removing 2-19

specifications 5-2

replacing 2-19

hard drive connector, location 4-5

NIC riser board, spare part number 1-4

hardware kit, spare part number 1-4

NICs, LEDs 4-9

heatsink, removing 2-13

non-maskable interrupt (NMI) switch 4-12

help resources vi
hot 2-3

hot-plug SCSI hard drives, removing 2-6
HP authorized reseller vii

parts catalog, illustrated 1-1

HP ProLiant BL p-Class System Setup and

Installation Guide 3-2

PCI-X adapter connectors, location 4-5
power button/LED board connector, location 4-5

HP ProLiant Essentials Rapid Deployment Pack

power button/LED cable

access 3-3

removing 2-21

description 3-3

replacing 2-21

HP SIM See HP Systems Insight Manager

power converter module

HP Systems Insight Manager

removing 2-20

access 3-2

replacing 2-20

description 3-2

Power On/Standby button, definition 4-10

HP, technical support vii

powering down, server blade 2-4
processor assembly

removing 2-13
replacing 2-14

icon, I/O 4-6

processor blank 2-12, 2-16

iLO RBSU See Integrated Lights-Out ROM-Based

Setup Utility (iLO RBSU)

processor sockets, location 4-5
processors, replacing 2-15

IML See Integrated Management Log (IML)
installing See replacing

Integrated Lights-Out ROM-Based Setup Utility (iLO

RBSU)

rack

access 3-2

cautions 2-2

description 3-2

warnings 2-2

Integrated Management Log (IML)

weight 2-2

access 3-2

RBSU See ROM-Based Setup Utility

description 3-2

redundant ROM, accessing 4-14

viewing 3-2

removing

battery 2-25

blade sleeve 2-26
blade sleeve board 2-27

kits

DIMMs 2-11

cable, server blade 1-4

Dual Port Fibre Channel adapter 2-18

hardware, server blade 1-4

fan assembly 2-17
handle 2-22

hot-plug SCSI hard drives 2-6

LEDs

NIC riser board 2-19

NICs 4-9

power button/LED cable 2-21

Power On/Standby 4-9

power converter module 2-20

server blade, front panel 4-8

processor assembly 2-13

server health 4-9

server blade blank 2-28

unit identification (UID) 4-9

server blades 2-5

Index-2

HP ProLiant BL30p Server Blade Maintenance and Service Guide

Summary of Contents for BL30p - ProLiant - 1 GB RAM
































































Search results

Summary of Contents for BL30p - ProLiant - 1 GB RAM

Reviews:

Related manuals for BL30p - ProLiant - 1 GB RAM

Brands by name

Popular brands

HP BL30p - ProLiant - 1 GB RAM, Maintenance And Service Manual

Search results

Summary of Contents for BL30p - ProLiant - 1 GB RAM

Reviews:

Related manuals for BL30p - ProLiant - 1 GB RAM

Brands by name

Popular brands