manualshive.com logo in svg

HP BL30p - ProLiant - 1 GB RAM, Maintenance And Service Manual

The HP BL30p ProLiant, equipped with 1 GB RAM, is a reliable and robust server. To ensure seamless operation, it comes with a comprehensive User Manual. Visit our website to download this manual for free and explore all the features and functionalities this powerful server has to offer.

Share
Download
background image

Removal and Replacement Procedures 

To remove a processor: 

1.  Remove the heatsink (3). 

 

 

CAUTION:  The heatsink is not reusable and must be discarded if removed from the 
processor after application. 

 

Figure 2-13:  Removing the heatsink 

HP ProLiant BL30p Server Blade Maintenance and Service Guide 

2-13

 

 

Summary of Contents for BL30p - ProLiant - 1 GB RAM
































































Reviews:

No comments

Related manuals for BL30p - ProLiant - 1 GB RAM

Cablematic BLE RS-232 Series Manual preview
BLE RS-232 Series
Brand: Cablematic Pages: 9
Devolo Vianect AIR TV Quick Manual preview
Vianect AIR TV
Brand: Devolo Pages: 39
Rockwell Automation Allen-Bradley CrossBoard 141C-G Series Installation Instructions preview
Allen-Bradley CrossBoard 141C-G Series
Brand: Rockwell Automation Pages: 4
Kozumi K-500MWUN User Manual preview
K-500MWUN
Brand: Kozumi Pages: 40
LSI LSISAS3041E User Manual preview
LSISAS3041E
Brand: LSI Pages: 46
Intermec CN2G User Manual preview
CN2G
Brand: Intermec Pages: 102
Intermec CN3 Series Quick Start Manual preview
CN3 Series
Brand: Intermec Pages: 12
Adaptec 1130U2 - Storage Controller RAID)- U2W SCSI 80 MBps Installation And Hardware Manual preview
1130U2 - Storage Controller RAID)- U2W SCSI 80 MBps
Brand: Adaptec Pages: 82
Eastern Times Technology GBU522 Quick Start Manual preview
GBU522
Brand: Eastern Times Technology Pages: 9
Emerson Smart Wireless THUM Adapter Quick Installation Manual preview
Smart Wireless THUM Adapter
Brand: Emerson Pages: 28
Emerson THUM Quick Start Manual preview
THUM
Brand: Emerson Pages: 48
Emerson Smart Wireless THUM Adapter Reference Manual preview
Smart Wireless THUM Adapter
Brand: Emerson Pages: 62
D-Link DHP-P621AV Quick Install Manual preview
DHP-P621AV
Brand: D-Link Pages: 16
D-Link DHP-329AV Brochure & Specs preview
DHP-329AV
Brand: D-Link Pages: 3
D-Link DHP-700AV User Manual preview
DHP-700AV
Brand: D-Link Pages: 23
D-Link DHP-701AV Quick Installation Manual preview
DHP-701AV
Brand: D-Link Pages: 2
D-Link dlinkgo GO-USB-N150 User Manual preview
dlinkgo GO-USB-N150
Brand: D-Link Pages: 40
D-Link DSB-650TX Installation Manual preview
DSB-650TX
Brand: D-Link Pages: 12

Brands by name

Popular brands

Load more brands