HP B1476 68020, User Manual, Page: 81 / 724

Function Key Commands
You can enter commonly used commands quickly and easily by pressing the
function keys F1 through F8 on your keyboard. Function keys can be used in
the graphical interface as well as the standard interface. The following table
and figure describe the commands associated with the function keys.
If you are using the debugger on a Sun SPAR Csystem, refer to the
"Installation" chapter for information on mapping function keys.
Function Key Commands
Function
Key Menu Equivalent,
Command Line Equivalent Description
F1
Display
→
Next Window,
Window Active Next
Activate the next higher numbered window.
F2
Display
→
Previous Window,
Window Active Previous
Activate the next lower numbered window.
F3
Settings
→
High Level Debug or
Settings
→
Assembly Level Debug,
Debugger Level
Switch between assembly-level and
high-level mode.
F4 R ight click on active window border,
Window Toggle_View
Select the alternate display of the active
window.
F5
Help
→
Command Line...,
Debugger ?
(Help)
Access on-line help.
F6
Display
→
Simulated I/O,
Window Screen_On Next
Access the standard I/O screen. Also access
any existing user-defined screens.
F7
Execution
→
Step Instruction
→
from PC,
Program Step
Execute one C source line (high-level
mode), or execute one microprocessor
instruction (assembly-level mode).
F8
Execution
→
Step Source
→
from PC,
Program Step Over
Execute one C source line, but treat whole
functions as a single line (high-level mode);
execute one microprocessor instruction, but
treat whole subroutines as a single
instruction.
Chapter 3: Entering Debugger Commands
57