manualshive.com logo in svg

HP Appliance 4200, Manual

Share
Download
HP Appliance 4200 Manual Download Page 95

Tested with Hewlett-Packard Co. products only.

Roseville, February, 10, 2001

Mark Vigeant, Product Regulations Manager

European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH,
Department TRE, Herrenberger Strasse 130, D-71034 Böblingen (FAX:+49-7031-14-3143).

Trademarks and Copyrights

Copyright (C) Hewlett-Packard Co. 2000

This information is subject to change without notice and is provided "as is" with no warranty.
Hewlett-Packard shall not be liable for any direct, indirect, special, incidental or consequential damages
in connection with the use of this material.

Microsoft, MS-DOS, Windows, Windows NT are U.S. registered trademarks of Microsoft Corporation.

Netscape and Netscape Navigator are U.S. registered trademarks of Netscape Communications
Corporation.

APC and other names of APC products referenced herein are trademarks or registered trademarks of
American Power Conversion Corporation.

UNIX is a registered trademark of The Open Group.

JetDirect is a registered trademark of Hewlett-Packard Company.

HP-UX Release 10.20 and later and HP-UX Release 11.00 and later (in both 32 and 64-bit
configurations) on all HP 9000 computers are Open Group UNIX 95 branded products.

Solaris is a product of Sun Microsystems.

Other product names are U.S. trademarks or registered trademarks of their respective owners.

GNU Public License

This product includes software licensed under the GNU General Public License and other open source
licenses. Copies of these licenses and information about obtaining source code for software licensed
under the GNU GPL are available by clicking on the links below:

Carnegia Mellon University

Warranty, Regulatory, and Licensing Information

http://albatross.rose.hp.com/~lindsay/pdfs/english/warr_reg.htm (5 of 22) [6/22/2001 11:26:04 AM]

Summary of Contents for Appliance 4200





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands