manualshive.com logo in svg

HP Appliance 4200, Manual

Share
Download
HP Appliance 4200 Manual Download Page 70

An I/O Error occurred while transferring the file.

The specified filename is not a valid upgrade file.
Retype the filename and try again.

The upgrade file has been transferred successfully.
You will need to restart your print server appliance for
the upgrade to take effect.

Confirmation message.

Restart Appliance

Message

Explanation / Remedy

The restart of the print server appliance has begun.
This system restart will take approximately 5-10
minutes. There will not be any web notification that
the system has been restarted.

Confirmation message.

TCP/IP

Message

Explanation / Remedy

Invalid IP Address
The IP address must be in the format xxx.xxx.xxx.xxx.

IP addresses are written as four numbers separated
by periods, where the first number is between 1 and
255 and the other three numbers are between 0 and
255. Retype the IP address in the format
xxx.xxx.xxx.xxx.

Invalid Subnet Mask
The subnet mask must be in the format
xxx.xxx.xxx.xxx.

Subnet masks are written as four numbers separated
by periods, where the first number is between 1 and
255 and the other three numbers are between 0 and
255. Subnet masks must be well formed to match
your network.
Retype the subnet mask in the format
xxx.xxx.xxx.xxx.

Invalid Gateway Address
The gateway address must be in the format
xxx.xxx.xxx.xxx. If the gateway address is unknown,
use the appliance's IP address.

Gateway addresses are written as four numbers
separated by periods, where the first number is
between 1 and 255 and the other three numbers are
between 0 and 255. Retype the gateway address in
the format xxx.xxx.xxx.xxx. If the address is
unknown, use the appliance's IP address.

Invalid DNS Server Address
The DNS server address address must be in the format
xxx.xxx.xxx.xxx.

Retype the DNS server address in the
xxx.xxx.xxx.xxx format.
Note: This must be the server's IP address, not its
friendly name. If the network does not have a DNS
server, leave this field blank.

System Messages

http://albatross.rose.hp.com/~lindsay/pdfs/english/sysmsgs.htm (3 of 6) [6/22/2001 11:25:59 AM]

Summary of Contents for Appliance 4200





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands