fio-beacon
This utility turns on all three LEDs of the specified IO Accelerator for identification.
NOTE:
This utility is not applicable for the mezzanine format of the IO Accelerator, which has no externally
visible LEDs.
fio-detach
Detaches the board from the OS to facilitate troubleshooting. fio-detach removes the “fiox” block
device of a particular IO Accelerator.
CAUTION:
Before using this utility, ensure that the device to be detached is not currently mounted or otherwise
in use.
fio-detach <device node> -q
<device-node>
Device node for the HP StorageWorks IO Accelerator board (/dev/fctx), where x indicates the board
number (0, 1, 2, etc). For example: /dev/fct0
-q
Quiet option. Disables progress status.
fio-format
Performs a low-level format of the IO Accelerator. This format is distinct from a format performed by
the operating system. The utility displays a progress bar and percentage as it completes the format.
NOTE:
The IO Accelerator ships pre-formatted, so normally you will not need to run fio-format except to
change the logical size of the device.
CAUTION:
Use this utility with care, as it deletes all user information on the IO Accelerator.
fio-format <ioDrive-device> [-q, -s <device-size>, -u, -h, -v]
where
<ioDrive-device>
is the control device name
(fctx)
where x indicates the device number
(0, 1, 2, etc). For example: fct0
Utilities
54
Summary of Contents for AJ878A - StorageWorks 320 GB Hard Drive
Page 14: ...Hardware installation 14 ...
