Firmware Already Updated
The IO Accelerator Management Tool program checks to see if the firmware update version is required
for the selected device. If the update and the current firmware are the same, IO Accelerator
Management Tool will notify you.
The dialog shows the same firmware version number in the dialog as well as the message that the
selected device is “already up to date." The IO Accelerator Management Tool program will also
gray-out the
Update
button, as this change is not required.
If you want to cancel the update, click the
X
at the upper right of the dialog to exit.
If you want to select a different firmware update file, click
Back
to return to the file selection dialog.
Attach Device
The
Attach Device
operation creates a link so the IO Accelerator interacts with the operating system.
In most cases, the operating system driver automatically attaches the installed IO Accelerator(s) at
boot time, so you only need to use
Attach Device
when you manually detach an IO Accelerator (such
as to perform a low-level format).
To attach a detached IO Accelerator and allow the operating system to interact with the device:
1.
Select one or more detached IO Accelerator(s) in the tree. They appear with the open link.
2.
Click
Attach Device
in the menu bar. The IO Accelerator Management Tool asks you to confirm
the attachment.
HP IO Accelerator Management Tool
46
Summary of Contents for AJ878A - StorageWorks 320 GB Hard Drive
Page 14: ...Hardware installation 14 ...
