60
To do…
Use this command…
Remarks
port-group
manual
port-group-
name
Configure the current port as a
member port of the multicast
VLAN
port multicast-vlan
vlan-id
Required
By default, a user port does not
belong to any multicast VLAN.
NOTE:
You cannot configure multicast VLAN on a device with multicast routing enabled.
The VLAN to be configured as a multicast VLAN must exist.
A port can belong to only one multicast VLAN.
Displaying and maintaining multicast VLAN
To do…
Use the command…
Remarks
Display information about a
multicast VLAN
display multicast-vlan
[
vlan-id
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
Multicast VLAN configuration examples
Sub-VLAN-based multicast VLAN configuration
Network requirements
•
Router A connects to a multicast source through GigabitEthernet 1/0/1 and to Switch A, through
GigabitEthernet 1/0/2.
•
IGMPv2 runs on Router A, and IGMPv2 snooping runs on Switch A. Router A is the IGMP querier.
•
Switch A’s GigabitEthernet 1/0/1 belongs to VLAN 10, GigabitEthernet 1/0/2 through
GigabitEthernet 1/0/4 belong to VLAN 2 through VLAN 4 respectively, and Host A through Host
C are attached to GigabitEthernet 1/0/2 through GigabitEthernet 1/0/4 of Switch A respectively.
•
The multicast source sends multicast data to multicast group 224.1.1.1. Host A, Host B, and Host C
are receivers of the multicast group.
•
Configure the sub-VLAN-based multicast VLAN feature so that Router A just sends multicast data to
Switch A through the multicast VLAN and Switch A forwards the traffic to the receivers that belong
to different user VLANs.
Summary of Contents for A5500 EI Switch Series
Page 12: ...xii Conventions 425 Index 427 ...
