HP A5500 EI Switch Series, Configuration Manual

Page: 296 / 443

284
To do... Use the command... Remarks
Specify the user VLAN that
comprises the current user ports
as the default VLAN
port hybrid pvid vlan vlan-id
Required
VLAN 1 by default
Configure the current user ports to
permit packets of the specified
IPv6 multicast VLAN to pass and
untag the packets
port hybrid vlan vlan-id-list {
tagged | untagged }
Required
By default, a hybrid port permits
only packets of VLAN 1 to pass.
NOTE:
For more information about the port link-type , port hybrid pvid vlan , and port hybrid vlan
commands, see the
Layer 2—LAN Switching Command Reference.
Configuring IPv6 multicast VLAN ports
In this approach, you configure a VLAN as an IPv6 multicast VLAN and assign user ports to it. You can
do this by either adding the user ports in the IPv6 multicast VLAN or specifying the IPv6 multicast VLAN
on the user ports. These two methods provide the same result.
Configure IPv6 multicast VLAN ports in IPv6 multicast VLAN view
Follow these steps to configure IPv6 multicast VLAN ports in IPv6 multicast VLAN view:
To do... Use the command... Remarks
Enter system view system-view —
Configure the specified VLAN as
an IPv6 multicast VLAN and enter
IPv6 multicast VLAN view
multicast-vlan ipv6 vlan-id
Required
No IPv6 multicast VLAN
configured by default
Assign the ports to the IPv6
multicast VLAN
port interface-list
Required
By default, an IPv6 multicast
VLAN has no member ports.
Configure IPv6 multicast VLAN ports in interface view or port group view
Follow these steps to configure IPv6 multicast VLAN ports in interface view or port group view:
To do… Use this command… Remarks
Enter system view system-view —
Configure the specified VLAN
as an IPv6 multicast VLAN
and enter IPv6 multicast VLAN
view
multicast-vlan ipv6 vlan-id
Required
Not an IPv6 multicast VLAN
by default.
Return to system view quit —
Enter interface view or port
group view
interface interface-type interface-number
Required
Use either command.
port-group manual port-group-name