HP A3715A, User Manual

Page: 16 / 32

1-6 A3715A CD-ROM Drive User’s Guide
Loading CDs (vertical mount)
1. Press the Eject button. The CD tray will
slide out of the drive.
2. Snap the bottom retaining tabs of the CD
tray (A and B) in toward the center of
the CD tray. The bottom retaining tabs
prevent the CD from slipping out.
3. Hold the CD by the center (with your
index or middle finger) and the edge
(with your thumb).
4. Place the CD in the CD tray so it is held
by the bottom retaining tabs. The print-
ing on the CD should face to the right.
5. Gently push the CD tray back into the
CD-ROM drive. After a gentle push, the
tray will enter the CD-ROM drive by
itself.
The Drive Status LED will light while the drive reads the CD. The LED will then turn off. The CD is
now ready for use.
Note Always keep the CD tray closed except when inserting or ejecting a CD. This
prevents dust from entering the CD-ROM drive.