38
Getting Started Guide
Using the Audio Wizard in the Sound Effect Manager
The Sound Effect Manager Audio Wizard can help you connect front-panel audio.
To use the Audio Wizard:
1
Turn on the PC.
2
Click
Start
on the taskbar.
3
Choose
Control Panel
.
4
Click
Sounds
, then
Speech and Audio Devices
(or
Sounds and Audio
Devices
).
5
Click
Sound Effect Manager
. The window opens.
6
Click
Audio Wizard
. A window opens that shows the connector panel on the
front of the PC.
7
Place a check in the
Enable jack detection
check box to enable the wizard.
8
Connect the speaker system audio cable plugs into the connectors on the front
of your PC. The panel display highlights a cable that is properly inserted in a
connector.
9
Close the window.
Retasking front-panel connectors with Sound Effect
Manager
With the Audio Wizard enabled, both the microphone connector and the
headphones connector on the front of the PC can be retasked to perform a different
audio function. These two connectors are universal audio jacks. When you plug in a
cable, the wizard asks you to select the function for the cable from a list, and then it
sets the universal audio jack to perform as the selected function. The functions are:
•
Stereo Speaker (Out)
•
Microphone (In)
•
Headphone (In)
•
Audio Line In
To retask front-panel connectors:
1
Follow steps 1 through 7 of the procedure, “Using the Audio Wizard in the
Sound Effect Manager” on page 38.
2
When you plug in a cable, the wizard asks you to select the device you
plugged in from a list.
3
Close the window.
Summary of Contents for A1210n - Pavilion - 512 MB RAM
