Configuring Speaker and Sound Options
33
5
Connect the stereo mini-jack of a Y adapter cable into the microphone (pink)
connector or the center speaker/subwoofer (gold) connector that matches the
back of your PC.
•
Connect the left and right ends of the Y adapter cable into the center/
subwoofer inputs on the back of the receiver/amplifier (5.1 or higher
channel system).
•
Plug the Y adapter cable into the subwoofer connector on the back of the
receiver even if a subwoofer is not used.
6
Turn on the receiver/amplifier.
7
Select the receiver/amplifier input that the Y adapter cables are plugged into.
8
Turn on the PC.
9
After the audio system is connected to the PC, configure the audio software for
sound output for your PC model:
•
Type 3 connectors: See “Configuring audio output with Multi-channel
Sound Manager” on page 35.
•
Type 6 connectors: See “Configuring audio output with Sound Effect
Manager” on page 37.
Connecting digital audio
(Select models only)
If you have a sound card and you are connecting your home stereo
AV receiver via Digital Out, plug the 3.5-mm stereo cable into the
Digital Out
connector on the sound card. Connect the red RCA stereo
cable in the 3.5-mm Y cable to the AV receiver’s digital input connector. If
the red RCA stereo cable does not work, try the white stereo cable. One
of the connectors is not used.
To connect digital audio, your PC must include a Digital Out connector on
the sound card or on the back panel. You do not need to connect
multichannel speaker outputs if you connect the digital output.
NOTE:
Always turn on the PC before you turn on the speaker system.
3
6
S
Summary of Contents for A1210n - Pavilion - 512 MB RAM
