HP 9840, Operation Manual

Page: 92 / 122

9840 Menu System
9840 Tape Drive Operations Guide— 429596-002
B -12
SCSI Configuration Menu
Language Selection in Configuration Main Menu
Selections: “Language?” (What language does the user want to select?)
Selects one of several operator display languages: English, Espanioles, Francais,
Italiano, or Deutcher.
1. If applicable, press Menu to access.
2. Press Select until the desired option displays.
3. Press Menu to exit to the next sub-menu.
Emulation Mode Sub-Menu In Configuration Main Menu
Selections: “Emul XXX” (Emulation Mode XXX)
Defaults to last saved selection.
Default is always “Emul STD” unless informed otherwise. Do not use a selection other
than STD unless instructed to do so by STK Engineering.
1. If applicable, press Menu to access.
2. Press Select until the desired option displays.
3. Press Menu to exit to the next sub-menu.
Library Address Sub-Menu In Configuration Main Menu
Selections: “Lib Adr Yz” (Library Address with Nibble Y flashing)
“Lib Adr yZ” (Library Address with Nibble Z flashing)
Defaults to last saved selection.
For 9710, and 9740 libraries, the addresses of all drives are 00. In each 9310 library
cabinet, looking at the back of the drives, the address sequence is:
•
Left column from top:0 through 9
•
Right column from top: A through 13
1. If applicable, press Menu once to access, or twice if wishing to bypass. If not
bypassing:
2. Press Select for Y nibble: Y will flash.
3. Press Select to increment Y nibble to the desired value.
Caution. There is also an “Emul STD’s” selection. Do not use this selection unless instructed
to do so by STK Engineering.
Caution. After saving the configuration change, always IPL the drive if its library address has
also been changed.