HP 9840, Operation Manual

Page: 27 / 122

9840 Operator Panel
9840 Tape Drive Operations Guide— 429596-002
2- 11
Operator Panel Display
Start Init Initialization started No action is necessary.
A Corporate ID Displayed at successful IPL
completion when the tape drive is
operational This ID might be of StorageTek or
another corporate distributor.
Trapped Boot is trapped in a closed loop No action is necessary.
UnWr (FSC) Unload switch was pressed while
a write was taking place Go to “Handling a UnWr xxxx
Indication” in Appendix A.
Write Prot Tape drive attempted to write to a
write-protected tape Change switch on tape cartridge to
write-enabled.
Writing The tape drive is in write mode No action is necessary.
Table 2-4. Operator Panel Messages
Display Probable Cause Recommended Action