![background image](http://html.mh-extra.com/html/hp/9000-rp4410/9000-rp4410_users-and-service-manual_164218118.webp)
Installing the System
Console Setup
Chapter 3
118
To enable general network connectivity for the server, follow these steps:
Step 1.
Obtain a valid IP address for each LAN port you plan to activate.
Step 2.
Connect the LAN cable from an available LAN port into a live connection on the network.
Console Setup
This section describes how to set up and start a console session on the server.
Setting Up the Console
Setting up the console includes the following steps:
•
Determine the physical access method to connect cables. There are two physical connections to the
Integrity iLO MP:
— LAN
— Local RS-232 serial port
•
Configure the Integrity iLO MP and assign an IP address if necessary. Though there are several methods
to configuring the LAN; DHCP with DNS is the preferred method. DHCP with DNS comes preconfigured
with default factory settings, including a default user account and password. Other options include:
— ARP Ping
— Local RS-232 serial port
— Remote/modem port