HP 70908A, Service Manual

Page: 334 / 335

O
operating errors, 4-4
operation, system verication tests, 1-2
Option 915, now referred to as Option OB3,
vii, 10-1
P
parameter menu, 2-12
command screen, 2-13
edit screen, 2-12
softkeys, 2-20
P art Listings , CLIP P ackets , Manual 2, viii,
10-1
PC board connector cleaning, 4-2
performance , system performance tests, 1-2
printer compatibility, 2-3
printing test results, 2-8
procedure , denition, 7-1
R
RAM requirements , minimum, 2-2
rear panel
removal/replacement, 9-6
related adjustments, 4-51
removal/replacement
A10 power supply/driver , 9-33
A11 last converter , 9-35
A12 controller , 9-38
A13 ALC/bias , 9-39
A14 front panel board , 9-40
A15 RF 1st converter, 9-41
A16 low pass lter , 9-43
A17 low pass lter , 9-45
A1 leveling amplier , 9-12
A2 LO multiplier , 9-14
A3 SYTFMD , 9-16
A4 input attenuator , 9-18
A5 V CO sampler, 9-21
A6 isolator , 9-25
A7 2nd mixer , 9-26
A8 321.4 MHz matching network , 9-28
A9 2nd converter PLL, 9-30
bandpass lter, 9-9
front panel, 9-3
module cover, 9-2
rear panel, 9-6
Replacement P arts , CLIP P ackets , Manual 2,
viii, 10-1
requirements
for SRM, 2-2
minimum RAM, 2-2
revision, module verication software, 2-1
S
serial numbers , module, 1-3
single tests, 2-8
softkeys
test menu, 2-22
software
installing, 2-5
version, 2-5
specialized test equipment, 5-4, 5-7
SRM, using an, 2-2
static-safe work station, 4-2
static-shielding containers, 4-3
status messages, 2-23
system performance tests, 1-2
system verication of operation tests, 1-2
T
T est 01. Flatness, 8-4
T est 02. Low Frequency Flatness < 10 MHz,
8-6
T est 03. Attenuator A ccuracy, 8-8
T est 04. Front P anel LEDs, 8-10
T est 05. 10.7 MHz Rejection , 8-12
T est 06. F eedthrough Out 21.4 MHz P ort,
8-14
T est 07. Harmonics Out 21.4 MHz P ort, 8-16
T est 08. Residual Emissions Out 21.4 MHz
P ort, 8-18
T est 09. Image Rejection, 8-20
T est 10. IF Rejection, 8-22
T est 11. 2nd Converter Startup, 8-24
T est 12. IF Sub-Harmonics, 8-25
T est 13. Residual Responses, 8-27
T est 14. Miscellaneous Residual Responses,
8-29
T est 15. 321.4 MHz IF Out Frequency
Response, 8-31
T est 16. 21.4 MHz IF Frequency Response,
8-33
T est 17. Step Gain, 8-35
T est 18. Gain Compression, 8-37
T est 19. A ux LO P ower and Harmonics, 8-39
T est 20. Diagnostics, 8-41
T est 21. LO Input Amplitude Range, 8-45
T est 22. RF Input Emissions, 8-47
T est 23. RF Input Return Loss, 8-48
T est 24. LO Output Return Loss, 8-50
T est 25. LO Input Return Loss, 8-52
T est 26. Reference Return Loss, 8-54
T est 27. Wide IF Output Return Loss, 8-56
T est 28. Narrow IF Output Return Loss, 8-58
T est 29. Noise Figure, 8-60
test, denition, 7-1
testing multiple modules, 2-7
test menu, 2-16
Index-5