HP 70908A, Service Manual

Page: 118 / 335

5
Recommended T est Equipment T ables
The HP Module V erication Software contains drivers only for the equipment shown in the
table below . The equipment is listed in order of preferred model number . The user must write
drivers to support substitute test equipment which must satisfy the listed critical specications .
In all cases , the specied aging rate requirement is 10
09
ms/day. The microwave source ,
synthesized source , and calibrated spectrum analyzer listed in T able 5-1 have internal time
bases that meet the aging rate requirement.
T able 5-1. Recommended T est Equipment
Equipment Recommended Model
Controllers
Controller HP 9000 Series 300 controller
Signal Sources
Full microwave source HP 8340A synthesized sweeper
(frequency response: 10 MHz{26.5 GHz)
Synthesized source HP 8663A synthesized signal generator , or
HP 8662A synthesized signal generator
Level generator HP 3335A synthesizer/level generator
Analyzers
Calibrated spectrum analyzer HP 8566B spectrum analyzer
(upgraded with rmware version 16.7.85 or later)
Scalar network analyzer HP 8757A scalar network analyzer
Detector (2 required) HP 11664E detector
Meters
Excess noise source HP 346C broadband noise source
Noise gure meter HP 8970B noise gure meter
P ower meter HP 436A power meter
P ower sensor HP 8485A APC-3.5 mm(m) power sensor
Precision DVM HP 3458A digital multimeter , or
HP 3456A digital multimeter
Multimeter HP 3478A digital multimeter
Ampliers
RF amplier (optional) HP 8447A RF amplier
HP 70000 Components
Mainframe HP 70001A mainframe
Local oscillator source HP 70900A/B local oscillator source
Extender module HP 70001-60013 extender module
External reference Refer to \External Frequency Reference " in Chapter 6.
Recommended T est Equipment T ables 5-1