Setup procedures
Logging on to Credential Manager
Depending on the configuration, you can log on to Credential Manager in any of the following ways:
●
Double-click the
HP ProtectTools Security Manager
icon in the notification area.
●
Click
Start
, click
All Programs
, and then select
HP ProtectTools Security Manager for
Administrators
.
●
In Windows XP, click
Start
, and then click
HP ProtectTools Security Manager
.
NOTE:
In Windows 7 or Windows Vista, you must launch the HP ProtectTools Security Manager for
Administrators to make changes.
After logging on to Credential Manager, you can register additional credentials, such as a fingerprint or
a Java Card. For additional information, refer to “
Registering credentials on page 12
.”
At the next logon, you can select the logon policy and use any combination of the registered credentials.
Using the Credential Manager Logon Wizard
To log on to Credential Manager using the Credential Manager Logon Wizard, use the following steps:
1.
Open the Credential Manager Logon Wizard in any of the following ways:
●
From the Windows logon screen
●
From the notification area, by double-clicking the
HP ProtectTools Security Manager
icon
●
From the “Credential Manager” page of HP ProtectTools Security Manager, by clicking the
Log On
link in the upper-right corner of the window
2.
Follow the on-screen instructions to log on to Credential Manager.
Registering credentials
You can use the “My Identity” page to register your various authentication methods, or credentials. After
they have been registered, you can use these methods to log on to Credential Manager.
Registering fingerprints
A fingerprint reader allows you to log on to Windows using your fingerprint for authentication instead of
using a Windows password.
12
Chapter 2 Credential Manager for HP ProtectTools
Summary of Contents for 6930p - EliteBook - Core 2 Duo 2.8 GHz
Page 1: ...HP ProtectTools User Guide ...
Page 108: ......
