HP 655 Page 88 Maintenance And Service Manual Download

Page: 88 / 105

Using the hard drive path you recorded earlier, open the folder on your hard drive that contains
the update.

Double-click the file that has an .exe extension (for example, filename.exe). The BIOS
installation begins.

Complete the installation by following the on-screen instructions.

NOTE:

After a message on the screen reports a successful installation, you can delete the

downloaded file from your hard drive.

Using System Diagnostics

System Diagnostics allows you to run diagnostic tests to determine if the computer hardware is
functioning properly.

To start System Diagnostics:

Turn on or restart the computer. While the “Press the ESC key for Startup Menu” message is
displayed in the lower-left corner of the screen, press

esc

. When the Startup Menu is displayed,

press

Click the diagnostic test you want to run, and then follow the on-screen instructions.

NOTE:

If you need to stop a diagnostics test while it is running, press

esc

Chapter 5 Using Setup Utility (BIOS) and System Diagnostics

Summary of Contents for 655










































































































Search results

Summary of Contents for 655

Reviews:

Related manuals for 655

Brands by name

Popular brands

HP 655, Maintenance And Service Manual

Search results

Summary of Contents for 655

Reviews:

Related manuals for 655

Brands by name

Popular brands