HP 655 Page 33 Maintenance And Service Manual Download

Page: 33 / 105

Sequential part number listing

Spare part number

Description

490371-001

Power cord for use in North America (3-pin, black, 1.83-m)

490371-021

Power cord for use in Europe (3-pin, black, 1.83-m)

490371-031

Power cord for use in the United Kingdom and Singapore (3-pin, black, 1.83-m)

490371-061

Power cord for use in Italy (3-pin, black, 1.83-m)

490371-081

Power cord for use in Denmark (3-pin, black, 1.83-m)

490371-111

Power cord for use in Switzerland (3-pin, black, 1.83-m)

490371-AR1

Power cord for use in South Africa (3-pin, black, 1.83-m)

490371-BB1

Power cord for use in Israel (3-pin, black, 1.83-m)

593553-001

6-cell, 47-Wh, 2.20-Ah, Li-ion battery

593554-001

6-cell, 55-Wh, 2.55-Ah, Li-ion battery

609939-001

65-W HP Smart AC adapter (RC, V, 3-wire)

622643-001

320-GB, 5400-rpm, 9.5-mm hard drive (does not include hard drive bracket, hard drive connector
cable, or screws)

NOTE:

The hard drive bracket, hard drive connector cable, and screws are included in the Hard

Drive Hardware Kit, spare part number 686261-001.

634250-001

750-GB, 5400-rpm, 9.5-mm hard drive (does not include hard drive bracket, hard drive connector
cable, or screws)

NOTE:

The hard drive bracket, hard drive connector cable, and screws are included in the Hard

Drive Hardware Kit, spare part number 686261-001.

641369-001

4-GB memory module (PC3, 12800, 1600-MHz)

646125-001

Keyboard for use in the United States (includes keyboard cable)

646125-031

Keyboard for use in the United Kingdom and Singapore (includes keyboard cable)

646125-041

Keyboard for use in Germany (includes keyboard cable)

646125-051

Keyboard for use in France (includes keyboard cable)

646125-061

Keyboard for use in Italy (includes keyboard cable)

646125-071

Keyboard for use in Spain (includes keyboard cable)

646125-131

Keyboard for use in Portugal (includes keyboard cable)

646125-141

Keyboard for use in Turkey (includes keyboard cable)

646125-171

Keyboard for use in Saudi Arabia (includes keyboard cable)

646125-211

Keyboard for use in Hungary (includes keyboard cable)

646125-221

Keyboard for use in the Czech Republic (includes keyboard cable)

646125-251

Keyboard for use in Russia (includes keyboard cable)

Sequential part number listing

Summary of Contents for 655










































































































Search results

Summary of Contents for 655

Reviews:

Related manuals for 655

Brands by name

Popular brands

HP 655, Maintenance And Service Manual

Search results

Summary of Contents for 655

Reviews:

Related manuals for 655

Brands by name

Popular brands