5.
Lift the display assembly
(3)
from the base enclosure.
Remove the display assembly:
1.
If it is necessary to replace the display bezel, display enclosure, or display hinges, remove the two
mylar screw covers
(1)
and the 2 Phillips PM2.5×4.0 screws
(2)
that secure the display bezel to
the display assembly. The screw covers for the 39.6-cm (15.6-in) computer are available in the
Rubber Kit, spare part number 608931-001, and for the 35.6-cm (14.0-in) or 33.8-cm (13.3-in)
computer are available in the Rubber Kit, spare part number 605789-001.
2.
Starting at the top of the display, flex the bezel
(1)
and work around the periphery of the bezel
(2)
and
(3)
to release the bezel from the display enclosure .
Component replacement procedures
91