3.
Lift the bezel
(4)
from the display enclosure.
4.
If it is necessary to replace the webcam module, disconnect the webcam cable from the module
(1)
, and pull the webcam module
(2)
that is attached with adhesive off the display enclosure. The
webcam module can be ordered by using spare part number 611026-001.
NOTE:
To replace the webcam module in the display enclosure, align the holes on the webcam
module with the pins on the display enclosure and press onto the double-sided tape.
5.
If it is necessary to replace the display hinges, remove the six Torx M2.5×6.0 screws
(1)
that
secure the display panel to the display enclosure.
92
Chapter 4 Removal and replacement procedures