manualshive.com logo in svg

HP 530 - Notebook PC, Management Manual

Share
Download
HP 530 - Notebook PC Management Manual Download Page 487

A-11

File Uploads, Downloads, and Resets

Transferring Configuration Files

Using the CLI to Copy and Reset Config Files. 

This example displays how 

to reset the configuration file back to the factory-default configuration on the 
device.

This example shows how to reset by ‘erasing’ the specified configuration file 
stored on the device.

This example displays how to copy the running configuration to a startup 
configuration file on the device.

 

This example displays how to ‘write’ the running configuration to a startup 
configuration file on the device.

 

Using the CLI to Copy Config files to a Remote Server. 

This example 

displays how to copy the startup configuration from the device to a remote 
server (TFTP). If using this command for a FTP or STP server, you will need 
to include the username and password for the server.

ProCurve Access Point 530#

copy factory-default startup-

config

ProCurve Access Point 530#

ProCurve Access Point 530#

erase custom-default

ProCurve Access Point 530#

ProCurve Access Point 530#

copy running-default startup-

config

ProCurve Access Point 530#

ProCurve Access Point 530#

write memory

ProCurve Access Point 530#

ProCurve Access Point 530#

copy startup-config tftp 

192.168.1.52 copystart

ProCurve Access Point 530#

Summary of Contents for 530 - Notebook PC



















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands